Sony HT-7100DH Operating Instructions Manual page 11

Name Function
Press to turn on or off the audio/
A AV ?/1
video components that the
(on/standby)
remote is programmed to
operate.
To turn the TV on or off, press
TV (Z) and then press AV ?/1.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (3).
Press to turn the receiver on or
B ?/1
off.
(on/standby)
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).
Press one of the buttons to
C Input
select the component you want
buttons
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components as follows. You
can program the remote to
control non-Sony components
following the steps in
"Programming the remote" on
page 70.
Button
VIDEO 1
VIDEO 2
VIDEO 3
DVD
SAT
TV
SA-CD/CD Super Audio CD/CD
TUNER
AUX
DMPORT
Press to activate the receiver
D RECEIVER
operation (page 33).
Assigned Sony
component
VCR (VTR mode 3)
VCR (VTR mode 2)
VCR (VTR mode 1)
DVD player
Satellite tuner
TV
player
Built-in tuner
Not assigned
DIGITAL MEDIA
PORT adapter
Name Function
E MUSIC Press to select sound fields
(MUSIC).
Press to select 2CH STEREO
2CH
mode.
Press to select A.F.D. mode.
A.F.D.
Press to select sound fields
MOVIE
(MOVIE).
Press to enter direct tuning
F D. TUNING
mode.
Press to activate the Auto
G AUTO CAL
Calibration function.
H Numeric Press the numeric buttons to
– preset/tune to preset stations.
buttons
a)
– select track numbers of the
(number 5 )
CD player, VCD player, LD
player, DVD player, MD
deck, DAT deck, or tape deck.
Press 0/10 to select track
number 10.
– select channel numbers of the
TV, VCR, satellite tuner, Blu-
ray disc recorder, hard disc
recorder, PSX, DVD/VHS
COMBO or DVD/HDD
COMBO.
Press TV (Z) and then press
the numeric buttons to select
the TV channels.
I MEMORY Press MEMORY to store a
station.
Press to enter the value after
ENTER
selecting a channel, disc or track
using the numeric buttons of the
VCR, CD player, VCD player,
LD player, MD deck, DAT deck,
tape deck, satellite tuner, Blu-ray
disc recorder or PSX.
To enter the value of Sony TV,
press TV (Z) and then press
ENTER.
J DISPLAY Press to select information
displayed on the TV screen of
the TV, VCR, VCD player, LD
player, DVD player, CD player,
MD deck, Blu-ray disc
recorder, PSX, satellite tuner,
DVD/VHS COMBO or DVD/
HDD COMBO.
To select information of Sony
TV, press TV (Z) and then
press DISPLAY.
continued
11 US