Amplifier Operation; Selecting The Component - Sony HT-DDW670 Operating Instructions Manual

Amplifier Operation

Selecting the component

1
Press input buttons to select the input.
To select the
VCR
Satellite tuner
DVD player
Super Audio CD or
CD player
Built-in tuner (FM/AM)
The selected input appears in the display.
2
Turn on the component and start
playback.
Note
If you select any video components, set the TV's
video input to match the component you selected.
3
Turn MASTER VOLUME –/+ to adjust
the volume.
Note
To avoid damaging your speakers, make sure that
you turn down the volume before you turn off the
receiver.
To mute the sound
Press MUTING on the remote.
The muting function will be canceled when you
do the following.
• Press MUTING on the remote again.
• Turn the power off.
• Increase the volume.
GB
18
Press
VIDEO 1 or
VIDEO 2
VIDEO 2
DVD
SA-CD/CD
FM or AM
To use the headphones
Connect the headphones to the PHONES jack.
• When the headphones are connected, speaker
output is automatically canceled and "SP"
does not light up in the display.
• When the headphones are connected, you can
select only the following sound fields
(page 27).
– HP 2CH (HEADPHONE 2CH)
– HP THEA (HEADPHONE THEATER)