Running Samsung Digital Presenter Program - Samsung SDP-850DX Software User's Manual

Running Samsung Digital Presenter Program

1. Make sure that your Samsung Digital Presenter is connected to the PC and both are
turned on.
2. Double-Click the SDP850DX USB Viewer icon(automatically placed on the Windows
desktop when you install). You can also select Samsung Digital Presenter program by
clicking Start → Program → SDP850DX USB Viewer
3. Samsung Digital Presenter View Panel and Control Panel are opened.
4. The current USB status (USB 2.0 mode or USB 1.1 mode) is displayed on Control Panel
title bar. And the images from Samsung Digital Presenter are displayed in the View
Panel window.
* Control Panel title bar (case of USB 2.0 mode)
* Control Panel title bar (A case of USB 1.1 mode)
✔
Note : • The Samsung Digital Presenter program does not run if the Presenter is
✔
Caution : • While viewing, capturing or printing images with the software
10
not connected to the PC or not turned on.
• SCREEN FULL mode is fit to XGA(1024 x 768) resolution.
• If the whole view of the Samsung Digital Presenter View Panel does not
appear, check if the graphic card on your PC supports 1024 x 768(65536
colors) or higher.
application or TWAIN Driver, do not turn off the power to the
presenter or disconnect the USB cable as damage may occur.