Omnitron Systems Technology OmniConverter GHPoE/S User Manual

Advertisement

Quick Links

Warranty

This product is warranted to the original purchaser against defects in material and
workmanship for a period of two (2) years from the date of shipment. A LIFETIME
warranty may be obtained by the original purchaser by registering this product within
ninety (90) days from the date of shipment at www.omnitron-systems.com/support.
During the warranty period, Omnitron will, at its option, repair or replace a product
which is proven to be defective with the same product or with a product with at least
the same functionality.
For warranty service, the product must be sent to an Omnitron designated facility, at
Buyer's expense. Omnitron will pay the shipping charge to return the product to Buyer's
designated US address using Omnitron's standard shipping method.
Limitation of Warranty
The foregoing warranty shall not apply to defects resulting from improper or inadequate
OmniConverter
®
use and/or maintenance of the equipment by Buyer, Buyer-supplied equipment, Buyer-
supplied interfacing, unauthorized modifications or tampering with equipment (including
removal of equipment cover by personnel not specifically authorized and certified by
GHPoE/S
Omnitron), or misuse, or operating outside the environmental specification of the product
(including but not limited to voltage, ambient temperature, radiation, unusual dust, etc.),
or improper site preparation or maintenance.
No other warranty is expressed or implied. Omnitron specifically disclaims the implied
warranties of merchantability and fitness for any particular purpose.
The remedies provided herein are the Buyer's sole and exclusive remedies. Omnitron
shall not be liable for any direct, indirect, special, incidental, or consequential damages,
whether based on contract, tort, or any legal theory.

Environmental Notices

User Manual

The equipment covered by this manual must be disposed of or recycled in accordance
with the Waste Electrical and Electronic Equipment Directive (WEEE Directive) of
the European Community directive 2012/19/EU on waste electrical and electronic
equipment (WEEE) which, together with the RoHS Directive 2011/65/EU, for electrical
and electronic equipment sold in the EU after July 1, 2006. Such disposal must follow
national legislation for IT and Telecommunication equipment in accordance with the
WEEE directive: (a) Do not dispose waste equipment with unsorted municipal and
household waste. (b) Collect equipment waste separately. (c) Return equipment using
collection method agreed with Omnitron.
The equipment is marked with the WEEE symbol shown to indicate that it must be
collected separately from other types of waste. In case of small items the symbol may
be printed only on the packaging or in this manual. If you have questions regarding
the correct disposal of equipment go to www.omniton-systems.com/support or e-mail
to Omnitron at intlinfo@omnitron-systems.com.
©2019 Omnitron Systems Technology, Inc.
38 Tesla, Irvine, CA 92618 USA
Phone: (949) 250-6510; Fax: (949) 250-6514
Page 2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OmniConverter GHPoE/S and is the answer not in the manual?

Questions and answers

Summary of Contents for Omnitron Systems Technology OmniConverter GHPoE/S

  • Page 1: User Manual

    If you have questions regarding the correct disposal of equipment go to www.omniton-systems.com/support or e-mail to Omnitron at intlinfo@omnitron-systems.com. ©2019 Omnitron Systems Technology, Inc. 38 Tesla, Irvine, CA 92618 USA Phone: (949) 250-6510; Fax: (949) 250-6514...
  • Page 2 OmniConverter® GHPoE/S User Manual PRODUCT OVERVIEW The OmniConverter GHPoE/S is a multi-port media converter that converts 10/100/1000BASE-T copper to 1000BASE-X or 100BASE-X fiber and supports Power over Ethernet up to 60 watts. Classified as Power Sourcing Equipment (PSE), the GHPoE/S can provide power to one or two Powered Devices (PDs) using standard UTP cables that carry the Ethernet data.
  • Page 3 2 FF 2 FF 2 SFP 2 SFP Switch DOWN Function RJ-45 RJ-45 RJ-45 Mode of Operation 1 RJ-45 2 RJ-45 1 RJ-45 2 RJ-45 AN/Man 100/10 FDX/HDX Forced Port 1 Auto The RJ-45 port is set to auto-negotiation with the following modes 100M Fiber Speed 10 or 100 FDX or HDX...
  • Page 4 When the DIP-switch is in the Up “Off” position, learning is turned off and all received SW15 controls the port redundancy mode of the module. When SW15 is in the Down packets are forwarded to all ports. “Off” (default) position, the fiber ports operate in a non-redundant (independent) mode. When SW15 is in the Up “On”...
  • Page 5 WARNING: Note the wire colors used in making the positive, negative and ground WARNING!!! connections. Use the same color assignment for the connection at the circuit breaker. NEVER ATTEMPT TO OPEN THE CHASSIS OR SERVICE THE POWER SUPPLY. OPENING THE Connect the power wires to the circuit breaker and switch the circuit breaker ON.
  • Page 6 VERIFY OPERATION UTP Port Indicators Once the module has been installed and configured per steps 1 - 4, verify the module Legend Indicator Description is operational by viewing the LED indicators. No link The Power LED indicates the module is receiving power. Green - ON Port linked at 100Mbps The Fiber Optic LEDs indicates the fiber optic connection has been established.
  • Page 7 Omnitron Systems Technology, Inc. 3 Pin Terminal (isolated) The following trademarks are owned by Omnitron Systems Technology, Inc.: FlexPoint A minimum DC input voltage of 50VDC is required to guarantee 25.5 watts (for 802.3at) or 51 watts (for HPoE) at the end of 100...

Table of Contents