Omnitron Systems Technology, Inc. SAFETY CONSIDERATIONS Warning The instructions in this User’s Manual are for use by qualified personnel only. To avoid electrical shock, do not perform any servicing of this unit or its accessories (such as power units) other than that contained in the operating instructions, unless you are qualified and certified to do so by Omnitron Systems Technology, Inc.
Page 3
2653 2663 Twinax to Twinax Only The OmniRepeater 400 may be used in pairs to convert from fiber to twinax and back, or in combination with a fiber star which will provide direct distribution of 5250 data to individual devices.
Page 4
Fiber Optic Link 0 Side - Use ST connector. c. Twinax Link 1 Side - Use standard IBM 7362229 or equivalent. Mounting Secure the OmniRepeater 400 chassis to either a flat surface (if tabletop) or to a standard 19” rack if rack-mountable. Power-Up In order to minimize the possibility of accidental power shut off to the OmniRepeater 400, no power switch has been designed into the product.