Fixing Of Lens - FujiFilm Fujinon FD32x12.5SR4A-CV1 Operation Manual

△ When using a heavy camera, use the tripod mounts of both the camera and the lens to fix them
！ WARNING
securely. If using the tripod mount on the lens only, the lens may be damaged due to the weight
of the camera, or the camera may become disconnected from the mount and fall down, causing a
serious accident.
By using the threaded hole (1/4-20UNC) for the tripod on the lens bottom and the 7 x M5 threaded hole, this lens
is attached to a housing or a mounting bracket. Screw the lens fixing screw provided with the housing or the
mounting bracket into the threaded hole on the lens bottom.
For more details on how to install, refer to the operation manual for the housing or the mounting bracket.
Note.
In the threaded hole (1/4-20UNC) for the tripod used for attaching the lens, use a screw that will engage to
a depth from 4.3 mm to 6.0 mm in the threaded hole.If a screw that does not engage to a depth from 4.3 mm
to 6.0 mm is used, the lens cannot be securely attached and may be damaged.
Note.
For the 7 x M5 threaded hole used for attaching the lens, use a screw that will engage to a depth from 3.5 mm
to 4.5 mm in the threaded hole. If a screw that does not engage to a depth from 3.5 mm to 4.5 mm is used, the
lens cannot be securely attached and may be damaged.
Note. For the 5 mm-diameter hole used to position the lens, use a positioning pin that engages to a depth of 4.5 mm
or less. If a pin that engages to a depth of more than 4.5 mm is used, the lens cannot be securely attached and
may be damaged.
1/4-20 UNC THREADED HOLE
5 mm-diameter hole
THREADED HOLE (M5)×7

FIXING OF LENS

LENS
1/4-20
UNC THREADED HOLE
THREADED HOLE (M5)
5 mm-diameter hole
- 7 -
CAMERA
Engagement lengths of attachment
Qty.
screws in relation to the threaded
hole depth
1
4.3mm～6.0mm
3.5mm～4.5mm
7
Engagement length of positioning
Qty.
pin in relation to the 5 mm-diameter
hole
4.5mm or Shorter