Maintenance Instructions - Ispring WCB Series User Manual

Premium whole house systems

Hide thumbs

Table Of Contents

Table of Contents

and let the unit sit for a while, and then flush again. It is not unusual for the water to appear

"cloudy" for a day or so following installation. This cloudiness is actually tiny air bubbles being

purged from the filters. This is normal and will clear up in a day or two.

NOTICE:

After prolonged periods of nonuse (such as a vacation), it is recommended that the system be

flushed thoroughly for at least 10 minutes before using the water.

Step 7 - Turn off the faucet and your system is ready for use.

NOTICE:

Even though there is filtered water in the cold water lines, the hot water heater is still full of raw

water. Through normal use, this water will be replaced with filtered water in about 2 or 3 days.

Your iSpring Whole House Water System requires care and cleaning after a period of time. It is

recommended that the cartridges be replaced every 6-12 months depending on the amount of

contaminants present in the water supply. If the system has been working properly and the

pressure is slowing, it may be time to change the filter cartridge.

Replacement cartridges and parts can be ordered online at

261-7611.

Chart of Model Numbers for Replacement Cartridges

System

sediment filter

Model#

FP15B

FP25B

WGB21B

N/A

WGB12B

N/A

WGB22B

WGB22BM

N/A

WGB22B-

N/A

WGB32B

N/A

WGB32BM

WGB32B-

N/A

iSpring WCB/WGB Series Premium Whole House Systems