Initializing The Base Station - Sony Vaio LocationFree LF-V30 Operating Instructions Manual

Initializing the Base
Station
If you initialize the Base Station, all settings are
reset to factory default.
Note
After initializing, all of the settings you made will be
deleted, including the device registration information.
z
Tip
If you want to initialize the wireless settings, initialize
them from the Wireless Settings screen (1 page 27
and 29) rather than initializing the Base Station.
1
Turn off the Base Station.
2
While pressing the RESET button with a
sharp-pointed object (e.g., a pen) on the front
of the Base Station, turn on the POWER.
Hold down the RESET button until the NET
AV LED on the front of the Base Station
lights red.
Base Station front panel
POWER button
RESET button
WIRELESS
NETWORK
NET AV LED
NET AV
SETUP
MODE
RESET
34