8 Select whether to assign the DNS server
automatically, or to assign the DNS server
manually.
The DNS server is only assigned
automatically if [Automatic IP Address
Configuration (DHCP)] is set for the IP
address.
If you select [Manual], enter the addresses of
your ISP's DNS servers in the [DNS1] and
[DNS2] fields.
[Auto] is selected at the time of purchase.
9 Click this to save changes.
Wireless Settings (Access
Point)
When you set the WLAN switch to “AP,” you can
change the wireless settings for the Access Point
mode of the Base Station. If you have changed the
settings of the Base Station, you should also
®
change the wireless settings of the LocationFree
client devices.
1
2
3
4
5
6
1 Wireless LAN devices that conform to the
IEEE802a/b/g standards can be used on the
following channels. When connecting your
computer to the Base Station via a wireless
connection, select a channel supported by the
LAN device.
• IEEE802.11a wireless LAN device: 5 GHz
• IEEE802.11b wireless LAN device: 2.4
GHz
• IEEE802.11g wireless LAN device: 2.4
GHz
Page 27