Others
About Self-Diagnostics Displays
If an error occurs during use, the POWER LED on the front panel of the Base Station alerts you to the
problem. Refer to the following table for descriptions of problems and possible solutions. If the problem
persists, contact Sony LocationFree
Self-diagnostics LED
Base Station front
panel
WIRELESS
NETWORK
NET AV
SETUP
MODE
RESET
POWER LED on the
Base Station
Blinks red
®
Customer Support (1 the back cover).
POWER
LED
Problem
There may be a hardware malfunction
or a settings file error.
Causes and remedies
1
Turn the Base Station power off and then on
again.
2
Initialize the Base Station (1 page 34).
3
If the problem persists, contact Sony
LocationFree
back cover).
33
®
Customer Support (1 the