Table of Contents
Advertisement
RF Exposure
ii
P21/P22/P23 Protected Network Station
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8464-MDS-P22-Redundant-Transceiver-Chasis-(Enet).aspx
Copyright Notice
This Installation and Operation Guide and all software described herein
are protected by copyright: 2007 GE MDS, LLC . All rights reserved.
GE MDS reserves its right to correct any errors and omissions in this
document.
Operational Safety Notices
The radio equipment described in this guide emits radio frequency
energy. Although the power level is low, the concentrated energy from
a directional antenna may pose a health hazard. Do not allow people to
come closer than 23 cm (9 inches) to the antenna when the transmitter
is operating in indoor or outdoor environments. More information on RF
exposure is on the Internet at www.fcc.gov/oet/info/documents/bulle-
tins.
This manual is intended to guide a professional installer to install,
operate and perform basic system maintenance on the described radio.
ESD Notice
To prevent malfunction or damage to this radio, which may be caused
by Electrostatic Discharge (ESD), the radio should be properly
grounded by connection to the ground stud on the rear panel. In addition,
the installer or operator should follow proper ESD precautions, such as
touching a grounded bare metal object to dissipate body charge, prior to
adjusting front panel controls or connecting or disconnecting cables on
the front or rear panels.
Environmental Information
The equipment that you purchased has required the extraction and use
of natural resources for its production. Improper disposal may contami-
nate the environment and present a health risk due to hazardous sub-
stances contained within. To avoid dissemination of these substances
into our environment, and to diminish the demand on natural resources,
we encourage you to use the appropriate recycling systems for disposal.
These systems will reuse or recycle most of the materials found in this
equipment in a sound way. Please contact the factory or your supplier
for more information on the proper disposal of this equipment.
Quality Policy Statement
We are committed to understanding and exceeding our customers'
needs and expectations.
• We appreciate our customers' patronage. They are our business.
• We promise to serve them and anticipate their needs.
05-4161A01, Rev. C
Advertisement
Table of Contents
