Table of Contents
Advertisement
Operation
Viewing the course of a data point in a graph
Î Select the data point from the bottom left-hand list.
Î Move the data point into the middle list.
Button:
Î Load the start and end dates of the data point into the corresponding data entry fields.
Button:
Î Load the data point into the graph. Button:
The course of the data point between the start and end dates is plotted.
Restricting the time period of the graph
Î Delete plotted data point.
This does not cause any data to be deleted in the CPU module.
Button:
Î Enter start and stop times and press OK.
Date format: DD.MM.YYYY
Time format: hh:mm:ss
Î Confirm the start and stop times.
Button:
Î Load the data point into the graph. Button:
Tip:
The plotted data point must only be deleted if the displayed time period needs to be
shortened. If the time period between 22.10 and 28.10 has been selected, data for
the time period between 21.10 and 28.10 can be displayed without having to delete
the plotted data point first. However, if the data point is then to be displayed for the
time period between 26.10 and 28.10, the plotted data point must be deleted be-
forehand.
Changing how the graph is displayed
Î Shift displayed graph section to the right or left
Buttons:
/
Î Reduce/expand the graph
Buttons:
/
16
EB 6616 EN
Advertisement
Table of Contents
