Table of Contents
Advertisement
Start-up
6.2 Configuring Auto Start
The application determined in Auto Start starts automatically on starting the web terminal.
1. Select [Auto Start] in the
Launcher.
2. If the required application
does not appear under "Ap-
plication", e.g. MicroBrowser,
press [Select] and select the
required application.
Note:
To use the TROVIS
MOBILE application in-
stead of the MicroBrowser
application, select
"Browser".
3. Activate Auto Start by select-
ing "ON" with green back-
ground.
4. Exit configuration.
Buttons:
and
5. Exit Auto Start by swiping up
from the bottom of the screen.
Note:
If a different application
other than one deter-
mined in Auto Start is to
be started, this must be
opened manually.
12
1.
3.
2.
5.
4.2
4.1
EB 6616 EN
Advertisement
Table of Contents
