Advertisement
Quick Links
Eleganzia
Two Handle Roman Tub Bathroom Faucet
STANDARDS
ASME A112.18.1/CSA B125.1
ASME A112.18.2/CSA B125.2
LISTED IAPMO/cUPC
Flow Rate Chart
G P M
2017-12-22 MAAN4322-1
Helpful Information
Tools:
Gather the necessary tools as shown below to complete the installation of
this faucet. Some may not be needed depending on the model of faucet you
are installing. Check with your local hardware store on the requirements of
your installation situation.
©
®
PLUMBERS PUTTY
SAFETY GLASSES
CHANNELLOCKS
Attention:
For easy installation, you will need:
- To read all the installation instructions completely before beginning.
- To read all the warning, attention and maintenance information.
- To purchase the proper supply lines.
Important
P S I
FLASHLIGHT
ADJUSTABLE WRENCH
SEALED-TUBE
HEX-KEY
WARNING:
Please keep the tools for future use!
Tighten connection with two wrench to prevent
damage to tube body. Be careful not to bend the
stem as this will void the product warranty.
BASIN WRENCH
SCREWDRIVER
PLIERS
TAPE
Advertisement
Related Manuals for Ancona Eleganzia
Summary of Contents for Ancona Eleganzia
- Page 1 Gather the necessary tools as shown below to complete the installation of this faucet. Some may not be needed depending on the model of faucet you are installing. Check with your local hardware store on the requirements of Eleganzia your installation situation. ©...
- Page 2 Installation size map Faucet Installation 6 7/8 in. 2 13/16 in. (175.2 mm) 2 3/8 in. (71.9 mm) 4 5/8 in. (60 mm) 5 11/16 in. (117.3 mm) (145.2 mm) 2 3/16 in. (55 mm) 3 9/16 in. (89.8 mm) 8 in.
- Page 3 Maintenance If faucet leaks from the handle or drips from spout, please replace cartridge following the steps: Connect the parts with supply lines as shown and tighten them with wrench. Cold water Hot water Remove the handle counter clockwise, as shown. Connect to water supply lines with either risers with the coupling nuts or supplied tube head interior connector or...
- Page 4 PART NAME Cleaning and care Parts list Handle Lock nut Daily cleaning and care are required in order to keep the product shining and working properly. O-ring Screw 1. Clean it with water and dry it with soft cloth. Adapter 2.
Need help?
Do you have a question about the Eleganzia and is the answer not in the manual?
Questions and answers