Dealer Pre-Delivery Checklist - H&S 430W Operator's Manual

DEALER PRE-DELIVERY CHECK LIST
AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS
After the Manure Spreader has been completely set-up, check to be certain it is in correct operating
order before delivering to the customer. The following is a list of points to inspect. Check off each item
as you have made the proper adjustments and found the item operating satisfactorily.
Manure Spreader was not damaged in shipment. Check for dents and loose or missing
parts. Report damage immediately to H&S Manufacturing Co., Inc.
Manure Spreader has been correctly assembled according to instructions in this manual.
All bolts and fasteners are tight.
All shields and guards are in place and secured.
All grease fittings have been lubricated. Gearbox is filled to proper levels.
See Lubrication Chapter of this manual for details.
Hoses and fittings if applicable, are properly attached and there are no visible leaks.
All drive chains are adjusted to proper tension. See Adjustment Chapter of this manual.
Decals are in place and legible.
Connect the Manure Spreader to a tractor and attach the PTO and make sure that the
PTO guards turns freely.
Connect the lights to the tractor if applicable. Lights and wiring functioning properly.
Run the Manure Spreader and make sure all components operate properly.
Hydraulic system if applicable, does not leak under pressure.
Model Number ______________________________________________
Serial Number ______________________________________________
Dealer's Name ________________________________________________________________
Inspection Date _____________________________________________
Signature of Pre-Delivery Inspector ________________________________________________
-3-