•
Select source channel Source:
o
Stereo channels from
(1&2) -> (15&16)
o
5.1 channels from
(1->6), (3->8) and (9->14)
•
Audio packet repetition rate
o
Packet rate: (1 ms or 125 us).
▪
SMPTE 2110 Conformance Level B requires support for both repetition rates. Level A = 1ms.
•
Output encapsulation format:
o
AES67(SMPTE 2110-30):
▪
Valid audio sources: Uncompressed only. AES67/PCM
▪
Stereo or 5.1
o
Compressed (SMPTE 2110-31):
▪
Valid for both compressed AND uncompressed input. Dolby-E, AES67/PCM
▪
Stereo only....
9.7.5 2110-40 Ancillary data
No parameters to configure. The ancillary data is by default included in the encoder. Stopping this essence is off course
possible to do when mapping the essences to the IP destination addresses on the IP output card.
Page | 59