Display Mad - HP FlexFabric 7900 Series Command Reference Manual

Table 5 Command output
Field
irf-port Load-Sharing Mode
irf-port 1/1 Load-Sharing Mode
Layer 2 traffic: destination-mac address,
source-mac address
Layer 3 traffic: destination-ip address,
source-ip address
Layer 4 traffic: destination-port,
source-port
destination-ip address, source-ip
address
destination-mac address, source-mac
address

display mad

Use display mad to display MAD status and settings.
Syntax
display mad [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
verbose: Displays detailed MAD information. If this keyword is not provided, the command only
displays whether a MAD mechanism is enabled.
Examples
# Display brief MAD information.
<Sysname> display mad
Description
Global load sharing mode for IRF links:
•
If no global IRF link load sharing mode has been configured,
the default global load sharing mode applies.
•
If a user-defined global load sharing mode has been
configured, the configured mode applies.
Link load sharing mode of IRF-port 1/1:
•
If you have not configured a port-specific load sharing mode,
the global IRF link load sharing mode applies.
•
If you have configured a port-specific load sharing mode, the
configured mode applies.
Default load sharing mode for traffic that has no IP header. By
default, this type of traffic is distributed based on source and
destination MAC addresses.
Default load sharing mode for non-TCP/-UDP IP packets. By
default, this type of traffic is distributed based on source and
destination IP addresses.
Default load sharing mode for TCP/UDP packets. By default, this
type of traffic is distributed based on source and destination port
numbers.
User-configured IRF link load sharing mode. In this sample output,
traffic on the IRF port is distributed based on source and
destination IP addresses.
User-configured IRF link load sharing criteria. In this sample output,
the criteria are source and destination MAC addresses.
8