HP FlexFabric 7900 Series Command Reference Manual page 10

To display the load sharing mode used on each IRF port in the IRF fabric, specify the irf-port keyword
but not any IRF port.
To display the load sharing mode used on a specific IRF port, specify both the irf-port keyword and the
member-id/port-number argument.
Examples
# Display the global load sharing mode for IRF links. In this example, because no user-defined global
load sharing mode has been configured, the default global load sharing mode applies.
<Sysname> display irf-port load-sharing mode
irf-port Load-Sharing Mode:
Layer 2 traffic: destination-mac address, source-mac address
Layer 3 traffic: destination-ip address, source-ip address
Layer 4 traffic: destination-port,
# Display the global load sharing mode for IRF links. In this example, because a global load sharing
mode based on source and destination IP addresses have been configured, the configured mode
applies.
<Sysname> display irf-port load-sharing mode
irf-port Load-Sharing Mode:
destination-ip address, source-ip address
# Display the load sharing mode of IRF-port 1/1. In this example, because neither port-specific load
sharing mode nor user-defined global load sharing mode has been configured, the default global load
sharing mode applies.
<Sysname> display irf-port load-sharing mode irf-port 1/1
irf-port 1/1 Load-Sharing Mode:
Layer 2 traffic: destination-mac address, source-mac address
Layer 3 traffic: destination-ip address, source-ip address
Layer 4 traffic: destination-port,
# Display the load sharing mode of IRF-port 1/1. In this example, a load sharing mode based on
source and destination MAC addresses has been configured on the port.
<Sysname> display irf-port load-sharing mode irf-port 1/1
irf-port1/1 Load-Sharing Mode:
destination-mac address, source-mac address
# Display the load sharing mode used on each IRF port.
<Sysname> display irf-port load-sharing mode irf-port
irf-port1/1 Load-Sharing Mode:
destination-mac address, source-mac address
irf-port1/2 Load-Sharing Mode:
Layer 2 traffic: destination-mac address, source-mac address
Layer 3 traffic: destination-ip address, source-ip address
Layer 4 traffic: destination-port,
source-port
source-port
source-port
7