Sony LF-X1, LF-X5 Operating Instructions Manual page 14

Base Station
The base station specifications are common to the LF-X1 and LF-X5.
Front
Rear
qf
qd
qs
qa
14
1 WIRELESS indicator
Indicates the wireless function status.
Blue lit:
Green lit:
channel.
Blue or green blinking (3 sec. intervals): Attempting to
connect with the monitor. The wireless function is
active but out of range.
1
2 INTERNET indicator
Indicates the connection status to an external network, such
2
as the Internet.
Green blinking: Attempting to connect.
Green lit: Connected to the network. The indicator blinks
3
when packets are transmitted.
Off: Not connected.
3 NetAV indicator
4
Indicates the NetAV connection status.
Green quick blinking: NetAV authentication has failed.
5
Green slow blinking: Attempting to connect with NetAV.
Green lit: Connected with NetAV.
Off: Not connected.
Red lit: The base station is being initialized.
when Dynamic DNS client settings fail.
4 POWER indicator (1 page 26)
Green lit: The power is on.
Red flashing: A malfunction has occurred.
5 POWER switch (1 page 26)
Turns the base station power on and off.
6 LAN port (1 page 37)
Connect a LAN cable.
7 USB port
8 VHF/UHF jack (1 page 20)
Connect an antenna cable.
9 VIDEO OUTPUT (AUDIO/VIDEO) terminal
(1 page 22)
Outputs audio/video signal input to the video input 2
terminal.
Connect audio and video cables.
6
0 DC IN jack (1 page 23)
Connect the AC power adapter for the base station (supplied).
7
qa IR BLASTER port (1 page 33)
Connect the IR Blaster (supplied).
8
qs IN 1 (S-VIDEO/AUDIO/VIDEO) terminal (1 page 21)
Connect audio cables and either a video or S-video cable.
qd IN 2 (AUDIO/VIDEO) terminal (1 page 21)
9
Connect audio and video cables.
qf CLR CFG button (1 page 135)
Returns all settings on the base station, including line and
0
wireless connection settings, to the factory defaults.
Connected with the monitor
Connected with the monitor
on the 5 GHz channel.
on the 2.4 GHz
Also turns red