Using The On-Screen Remote Control - Sony LF-X1, LF-X5 Operating Instructions Manual

• Some devices may not have a [Power] button
(e.g. DVR). In this case, as well, use the on-
screen remote to display [Video 1] or [Video 2]
and confirm that the buttons are enabled.
12
Select [Back].
The [Remote] window reappears.
13
Select [Back].
The [TV/Video] window reappears.
14
Select [Settings], then select [Exit].

Using the On-screen Remote Control

Using the On-
screen Remote
Control
Configure the on-screen remote control for
external devices connected to the base station
using the IR Blaster (supplied). For more on
connecting other devices, see "Connecting Other
Devices" (1 page 21).
Setting Up and Connecting
the IR Blaster
1
Connect the IR Blaster to the IR BLASTER
port on the base station.
to IR BLASTER port
2
Position the IR Blaster above the infrared
receiver on the external device.
To locate the infrared receiver, see the
operating instructions for the connected
device. Make sure to place the IR Blaster just
above the infrared receiver.
33
Continued