Using The Drawing Palette - Sony LF-X1, LF-X5 Operating Instructions Manual

Using the Drawing Palette

Pen panel
The display examples shown below are for the LF-X1. For the LF-X5, the actual screens will differ.
To draw pictures or text
1 Select the type of pen.
2 For [Width], select the width of the pen
tip.
3 Select the color you want to use from the
color palette and it appears in the [Color]
box.
4 Draw pictures or text on the screen.
Note
If you select the black frame of the color
palette, the [Color] box turns black.
To apply effects
You can apply effects to the entire image.
[Brighter]: Brightens the image.
[Darker]: Darkens the image.
[Neg./Pos.]: Reverses the colors of the
image.
[Sepia]: Applies a sepia tone to the
image.
[Mosaic]: Applies a mosaic filter to the
image. With each press (up to
10 times), the mosaic
becomes more intense.
Pressing here 11 times
restores the original image.
To undo an operation
Select [Undo].
The last operation you performed on the
image is undone.
Drawing on the Screen
To blur an image
Select [Blur], then use the stylus to
select the area you want to blur.
To erase pictures or text
1 Select [Eraser].
2 For [Width], select the width of the
eraser.
3 Use the stylus to select the area you
want to erase.
To pick a color from an
image
1 Select [Pick].
2 On the image, touch the color you want
to use.
The [Color] box turns the color you
touched, and you can draw with that
color.
To paint an entire area
You can paint in the entire area
enclosed by a shape, such as a circle or
polygon.
1 Using the pen, draw the shape you want
to paint in.
2 Select [Paint].
3 Select the inside of the shape.
The entire shape is painted the color in
the [Color] box.
Note
The entire screen (not just the shape) is
painted when:
• You have not closed the shape.
• You have changed the paint color
after drawing a closed shape.
• You have used Stamp or Pastel to
draw a shape.
Continued
109