Upc-A - Mindeo CR40 Series User Manual

4-7 UPC-A

Read:
Format
Check digit verification: The check digit is optional.
Check digit trans.: By setting Enable, check digit will be transmitted.
Code ID setting: Code ID is a one-or-two-character string used to represent the symbol upon a
succeeding reading. If you want application to transmit Code ID, you must set Code ID transmission to
be enabled. Refer to
Insertion group selection: Refer to Global insertion group selection of
global settings
.
Supplement digits: The Supplement digits barcode is the supplemental 2 or 5 characters.
Format
System character
Truncation/Expansion:
Truncate leading zeros- The leading "0" digits of UPC-A data characters can be truncated when the
feature is enabled.
Expand to EAN-13- It extends to 13-digits with a "0" leading digit when the feature is enabled.
System character
7-35 String transmission
Data digits (10 digits)
Data digits (10 digits)
.
Check digit
26
Check digit
7-4 Scanning mode and some
Supplement digits 2 or 5