Inserting A Battery - Sony GPS-CS3KA Operating Instructions Manual

Gps unit kit
Table of Contents

Advertisement

Available languages

Available languages

Inserting a battery

You can use one of the following batteries.
• LR6 (size AA) alkaline battery
• HR6 (size AA) Nickel-Metal Hydride battery (recommended)
Note
The battery life of an LR6 (size AA) alkaline battery is shorter at temperatures lower than 25 °C
(77 °F). It is recommended that you use a Nickel-Metal Hydride battery.
1
Open the battery cover.
2
Observe the e/E marks on the
battery compartment, and insert
the battery with the correct
polarity.
Insert the E side first as shown to the right.
3
Close the battery cover.
x
Removing the battery
Turn the power off, hold the GPS unit with the battery cover up, and then remove the
battery.
Be sure not to drop the battery.
14

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents