Install the software in the following procedures.
x
Installing GPS Image Tracker and PMB
1
Turn on your computer, and insert the supplied CD-ROM
into the CD-ROM drive.
The screen to select the Setup Language appears.
For Windows Vista, the AutoPlay screen appears. Select "Run Setup.exe." and
•
follow the instruction that appears on the screen to proceed with the installation.
If the installation does not start, click [Start] t [My Computer], then double-
•
click the
(SONYPICTUTIL) icon.
2
Select the desired language, then click [Next].
The "License Agreement" screen appears.
3
Read the agreement carefully. If you accept the terms of this
agreement, click the radio button next to [I accept the terms
of the license agreement] and then click [Next].
The screen that shows the completion of the installation preparation appears.
4
Confirm the installation setting and click [Install].
5
Follow the instructions on the screen to complete the
installation.
When the restarting confirmation message appears, restart the computer by
•
following the instructions on the screen.
The installation screen of the software may appear depending on the system
•
environment of your computer. Follow the instruction to proceed with the
installation.
6
Remove the CD-ROM after the installation is complete.
21