Wiring Of System Modules; Modules Compatibility With Control Panels Pxx - SECOLink P16 Wiring Manual

Intruder alarm system
Control panels Pxx are designed in the way, that most commonly used modules can be directly plugged-on to the panel board (GSM module GSVU, video module
VIDNET). All other modules that do not have a direct interface with the panel must be connected to data bus - KRbus.
KM20B, KM20BT KM20B, KM20BT
Z2 COM Z2 COM +12V Z1 +12V Z1 +12V COM +12V COM CLK DAT CLK DAT
DAT DAT
CLK CLK
COM COM
+AUX +AUX
KM24, KM24A, KM24G KM24, KM24A, KM24G
DAT
CLK
COM
+AUX
Page 4

Wiring of system modules

Wiring of system modules
P16 P16
P32 P32
P64 P64
20VAC +BELL COM -PGM +PGM COM CLK DAT +AUX Z1 COM Z2 +AUX Z3 COM Z4 -Z5F +Z5F Z6 +AUX Z7 COM Z8
KRbus KRbus
GSVU
ANT
LOCK LOCK
OPEN OPEN
EXM800 EXM800
+12V COM CLK DAT
Z1 COM Z2K7 Z3K6 Z1 COM Z2K7 Z3K6 COM COM Z4K5 Z5K4 Z4K5 Z5K4 COM COM Z6K3 Z7K2 Z6K3 Z7K2 COM COM
VIDNET
P16
P32
P64
BAT
20VAC +BELL COM -PGM +PGM COM CLK DAT +AUX Z1 COM Z2 +AUX Z3 COM Z4 -Z5F +Z5F Z6 +AUX Z7 COM Z8

Modules compatibility with control panels Pxx

Module
KM20B, KM20BT Compatible (firmw.: v.5.030 and +)
KM24, KM24A Compatible (firmw.: v.2.051 and +)
KM24G
PROX8
Only first 31 users will be able to control the system. Only first 32
EXM800
EXM3F
RCM800WL
EXT016, EXT216
EXT116S
PWR20
GSVU
GSV6, GSV6T,
GSV6U It is recommended to use GSVU module with P series control
when it is necessary to install module outside the cabinet.
LAN800
VIDNET
Control Panels P16, P32, P64
Not used
+12V COM CLK DAT
Ethernet cable
PROX8
DAT
CLK
COM
+12V
+AUX +AUX
Z8K1 Z8K1
LOCK LOCK
OPEN OPEN
P16 P32
Compatible (firmw.: v.3.009 and +)
Limited compatibility (firmw.: v.0.10)
zones will be monitored by PROX8 LEDs.
Compatible (firmw.: all versions)
Compatible (firmw.: all versions)
Compatible (firmw.: all versions)
Compatible (firmw.: all versions)
Compatible (firmw.: all versions)
Compatible (firmw.: all versions)
Compatible (firmw.: all versions)
Compatible (firmw.: from v.1.025)
panels. GSV6x module is only useful
Compatible (firmw.: from v.1.42)
Compatible (firmw.: all versions)
Wiring manual
LAN800
CAM1 CAM2 CAM3CAM4 COM COM COM COM
P64
Not compatible
Not compatible