Operation; Switch The Device On; Switching Off The Device; Procedure In An Emergency - Fujitsu ESPRIMO D53 Series Operating Manual

Operation

Operation

Switch the device on

► If necessary, switch the monitor on (see the operating manual for the monitor).
Monitor Device
► Press the ON/OFF switch on the front of the device.
The power indicator glows and the device is started.

Switching off the device

Switching the device off does not disconnect it from the mains voltage. To completely
disconnect the mains voltage, remove the power plug from the power socket.
► Shut down the operating system in the proper way.
Device Monitor
The devices switches to power saving mode automatically and switches off.

Procedure in an emergency

If the device cannot be switched off, you can force a shutdown by
using the following emergency procedure.
Warning, this could lead to a loss of data!
► Press the ON/OFF switch for at least 4 seconds.
The device will switch off.
When you next restart the device, error messages may be displayed
due to the improper shutdown.

Settings in BIOS Setup

BIOS Setup, System settings, BIOS Setup, BIOS Setup, BIOS Setup Setup,
In the BIOS Setup, you can set system functions and the hardware configuration of the
device. At delivery, the default entries are effective (see BIOS manual or mainboard
manual). You can customize these settings in the BIOS Setup.
22 Fujitsu