Setting The Video Inputs - Sony WEGA KLV 21SR2 Operating Instructions Manual

Watching the TV

Setting the Video Inputs

You can enjoy images (and sound) from optional
video equipment connected to this unit by selecting
the appropriate input. For details on connection, see
pages 8 through 19.
28
1
Press TV/VIDEO repeatedly until the desired
video input appears.
Each time you press TV/VIDEO, the input
changes as follows:
Select
• TV
• VIDEO 1 IN
• VIDEO 2 IN
• VIDEO 3 IN
* "S Video 1" or "S Video 2" will appear instead if you
0-9 and ENT
** The type of picture signal (480i or 480p) appears under
(enter) buttons
Tips
• You can also select the inputs by using the TV/VIDEO
• When you have preset a label for each video input using
2
Operate the selected optional equipment.
For details, see "Operating Video Equipment
with Your TV Remote Control" on page 30, or
refer to the instructions supplied with each
equipment.
1
To return to watch the TV
Press the 0-9 and ENT (enter) buttons or CH +/–.
CH +/–
Display indication
TV
r
Video 1*
r
Video 2*
r
Video 3**
use S VIDEO input and if "Auto YC" in the
menu is set to "On" (page 12).
"Video 3."
button on the TV.
"Video Label" in the (Setup) menu, the label will be
displayed (see page 29).
or
T
(Setup)