Bundling Cords And Cables - Sony WEGA KLV 21SR2 Operating Instructions Manual

Installing and Connecting the TV

Bundling cords and cables

You can organize the cables in the back of the TV.
1
Bundle the cables and secure them with the clips
on both sides of the TV.
Note
It may not be possible to fasten with clips if cables are too
thick.
2
Pass the cables through the grooves. Be sure to
place the cables inside the tabs at the bottom of
the TV.
Note
If all the cables cannot be stored inside, you may leave
some of them hanging down on both sides of the TV.
10
3
Gather the cables from both sides together and
secure them with the clip at the bottom.
Note
It may not be possible to fasten with clips if cables are too
thick.
Clips
Note
If the cables are not neatly stored in the grooves, you may not be
able to attach the rear cover.
Tabs
Clip