Using The Timer Menu - Sony Wega Trinitron KV-27FS13 Operating Instructions Manual

Operating Instructions
Using the Timer
To access the Timer menu, refer to the following steps:
To display
Current
Time
Timer 1 and
Timer 2
Scheduled
viewing


You must set the Current Time before you can use Timer 1 and Timer 2.


You can set the Timer to ON, OFF, or Set. Once the timer is set, you can turn it
on or off without having to go through the settings.
Daylight
Saving


When you perform Auto Program, all Timer 1 and Timer 2 settings will be
cleared.


Any loss of power will cause Current Time, Timer 1 and Timer 2 settings to be
cleared.
34
Menu
To highlight
Video Audio Channel Parent
Timer 1: Set
Timer 2: Set
Current Time
Daylight Saving: OFF
Move
With the menu open:
f
1 Press F or to select the current time, then press
(If you are in Daylight Saving time, be sure to set
Daylight Saving to "ON").
f
2 Press F or to enter the current time, then press
3 Press to exit the menu.
With the menu open, set cursor on Timer 1 or Timer 2:
f
1 Press F or to select Timer 1 or Timer 2, then press
f
2 Press F or to enter your time and channel of
preference, then press
3 Press to exit the menu.
OFF: Select in fall at the end of Daylight Saving.
ON: Select in spring to compensate for Daylight Saving.
Timer Setup Basic
--:--AM
---
Select End
.
To select
MENU
.
.
.