Operating Elements And Connections - Omnitronic MPVZ Series User Manual

3 Operating Elements and Connections

This user manual describes the MPVZ-350.6 as a reference. The other models are similar in construction.
Frontseite
No. Element
1 Power on/off
2 Control Level
3 Klangregler
4 Tone controls
5 Input MIC 1
PRIORITY
6 LED level meter
7 Controls ZONE 1 to 6
8 Controls LINE 1 to 3
9 Button CHIME
10 LED FAULT
11 POWER LED
MPVZ-350.6
-12 +12
-12 +12
1 2
3
Function
Turns the unit on and off. The power indicator lights up when the unit is
powered on.
Master control for the total volume.
2-way tone control for the output signal: bass and treble.
2-way tone control for the output signal: bass and treble.
• Combo connector (XLR/6.3 mm jack) for connecting a dynamic
microphone.
• This input has priority: In case of an announcement via this microphone
channel the level of the other signal sources is attenuated–depending on
the rear control PRIORITY LEVEL–thereby increasing the intelligibility of
the announcement.
Indicates the level of the output signal.
5-step volume controls for the PA zones 1 to 6.
Volume controls for the line inputs LINE 1 to 3.
For releasing the chime.
Lights up with activated protective circuit:
• for a few seconds after switching-on unit the speaker outputs are ready for
operation
• during operation when the protective circuit has switched off the speakers
in case of a defect
8 9 10
LINE 1 LINE 2 LINE 3
PRIORITY MIC 1
4 5
17 • EN
11
FAULT
6 7