Page 2
• Use only the factory specified Delta Regis brand replacement parts and accessories with these tools. • And damage to the tool, battery, and/or battery charger resulting from misuse, abuse, or failure to follow these guidelines will void the limited product warranty.
ESB8 Cordless Inline Screwdriver Operation Manual Tool Overview Suspension Bail Allows tool to be suspended from a spring balancer or similar device ESB-10VL2500 Battery Provides power to the tool, slides into back (hold button on battery to remove) Indicator Lights Indicate battery charge and rundown status (see pg.
ESB8 Cordless Inline Screwdriver Operation Manual Quick Set-Up and Operation Overview 1. Fully charge the battery using the battery charger before first use to achieve maximum fastening cycles. Slide the battery into the end of the screwdriver. 2. Ensure that the screwdriver’s FWD/REV switch is ‘OFF’ (central position). While the switch is in this position, the tool’s speed can be toggled between high and low by pressing and holding the trigger switch for 5 seconds.
Page 6
ESB8 Cordless Inline Screwdriver Operation Manual Indicators There are two indicator lights on the ESB8 screwdrivers. The light nearer to the back of the tool [1] indicates the rundown status. When the tool stops running, it will light up green if the target torque was hit and the clutch deactivated the tool, indicating a good rundown.
ESB8 Cordless Inline Screwdriver Operation Manual Parts and Accessories If you require parts or accessories for your Delta Regis product, please refer to our website or contact us for further information. Service This device is not user serviceable. Any repairs must be performed by a Delta Regis authorized service center. Please consult Delta Regis Tools for further information and the location of the nearest authorized service center.