Table of Contents
Advertisement
Maintenance
9.
9.1. Inspection
•
Check if smoke or foul smell is not being issued when turning on the power. When abnormality is found,
turn off the power and contact your service man.
•
If all of 4 LEDs on the front panel is being lit after the activation, the device is not activated correctly.
Turn off the power and contact your service man.
•
If the [ALM] LED on the front of the device lights, the device is in the abnormal status. Stop the
measurement and turn off the power, and then contact your service man.
If the [FAN ALM] LED on the front of the device lights, the fan is faulty. Stop the measurement and turn
•
off the power, and then contact your service man.
When the power cable is faulty, replace with a power cable with the ground terminal compliant with the
•
appropriate specifications (IEC60320 C-13 10A/250V).
9.2. Consumables
The heating lamp's life is expected to light approximately 1,000,000 times.
If an alarm occurred, ask our service for replacement .
19
Advertisement
Table of Contents
