Magazine Set - Panasonic UD-7900N14EU Operating Instructions Manual

Magazine Set

8.
When executing a measurement, firstly set the magazine to the automatic changer.
Release the lock of the door on the right side and open the door. If there is an unnecessary magazine in the
measurement section, remove it by clicking [Unload Tray]. If the shelf position is not "1", return the
automatic changer to shelf position 1 by clicking [Changer Rev.]. The window will display the shelf position
in the form of "[Shelf number] - [Slot number]".
If the shelf number is "1" and there is no magazine in the reader, "Batch Status" will display 01-00.
(If the magazine is not in the measurement section, "00" will be displayed for the slot position.)
Magazines at the bottom shelf will be set first.
Set TLB No 1. The bottom stage of the shelf is shelf position 1 and the top stage of the shelf is shelf position
10.
TL Badge
Changer Rev
Changer Adv
Mag Adv
Mag Rev
Unload Tray
Load Tray
START
STOP
Reversely advances the shelf by 1 step.
Advances the shelf by 1 step.
Advances the magazine by 1 slot.
Reversely advances the magazine by 1 slot.
Returns the magazine from the reader to the
automatic changer.
Takes the magazine out of the automatic
changer and send it to the reader.
Starts the measurement of a badge.
Stops the measurement of a badge.
17
TLB No.１