Advertisement
Switching on the set
1
It is important that you connect the Media
Receiver Unit and the Display Unit to the
mains socket (220-240V AC, 50/60Hz) in
the following order:
First:
Media Receiver Unit
Second: Display Unit
2
The first time that the TV set is connected, it
is usually turned on. If the TV is off, press
the
Power switch on the media receiver
unit to turn on the TV.
Selecting the language of the menu
screens, the country and setting
5
the current time
This TV set works with menu screens. By following the
instructions below, you can select the desired language
of the menu screens, the country in which you wish to
operate the TV set and set the current time.
The first time you press the
Picture Adjustment
Picture Mode:
Live
a Language menu displays automatically on
Contrast:
Reset:
Noise Reduction:
Auto
Film Mode:
Colour Tone:
Normal
Auto
the TV screen.
Select:
Enter:
OK
Exit:
MENU
m
1
m
2
Country
Select country
Off
Ireland
Nederland
België/Belgique
Luxembourg
France
Italia
Schweiz/Suisse/Svizzera
m
3
Clock Set
0 0 : 0 0 :
0 0
Mon
m
Please connect your equipment
according to this chart
DVD
OK
Automatically Tune the
6
TV
You need to tune the TV to receive channels (TV Broadcast). By
following the instructions below, this set automatically searches
and stores all available channels for you.
Power switch,
Press the
/
/
or
button on the
remote control to select the language, then
Auto Tuning
press the OK button to confirm your
Programmes found:
selection.
From now on all the menus will appear in
the selected language.
The Country menu appears automatically
on the TV screen.
Press the
or
button to select the
country in which you will operate the TV
set, then press the OK button to confirm
your selection.
• If the country in which you want to
use the TVset does not appear in the
list, select "off" instead of a country.
Programme Sorting
01
TVE
02
TVE2
03
TV3
04
C33
The Clock Set menu appears on the TV
05
C27
06
C58
screen.
07
S02
08
S06
a) Press
or
to set the hour, then press
.
b) Press
or
to set the minutes, then
press
.
c) Press
or
to set the day of a week,
then press OK at the time signal.
The clock starts.
A diagram showing you how to connect
equipment to your TV set appears on the
TV screen. Follow the instructions and
finally press the OK button to remove the
picture and continue the automatic tuning
process.
The connection diagram should be
used as a guide only as most
equipment can be connected to more
than one type of TV socket. Once the
TV has completed the automatic
tuning process, refer to the
'Connection Guide' section on page
27 of the instruction manual for
further information on getting the
best set up for your equipment.
Your television stations are now stored in your television's memory.
Changing the Programme Order
7
of the broadcast channels
By following the instrutions below, you can rearrange the
order in which the broadcast channels appear on the screen.
1
Press the OK button on the remote control
Do you want to start
automatic tuning?
to select Yes.
Yes
No
m
2
The TV starts to automatically search and
4
store all available broadcast channels for
you.
This procedure could take some
minutes.
Please be patient and do not press
any buttons while the auto tuning is
in progress, otherwise the auto tuning
will not be completed.
If no channels were found during the
No channel found.
Please connect aerial
auto tuning process then a new menu
Confirm
appears automatically on the screen
asking you to connect the aerial.
m
Please connect the aerial (refer to the
step 4) and press OK. The auto
tuning process will start again.
When the auto tuning is finished, the
Programme Sorting menu appears on the
screen.
8
a) If you wish to keep the broadcast
channels in the tuned order:
Press the MENU button on the remote
Programme Sorting
01
TVE
control to exit and return to the normal TV
02
TVE2
03
TV3
screen.
04
C33
05
C27
06
C58
07
S02
08
S06
Your set is now ready for use.
b) If you wish to store the broadcast
channels in a different order:
1
Press the
or
button to select the
Programme Sorting
programme number with the channel (TV
01
TVE
02
TVE2
Broadcast) you wish to rearrange, then
03
TV3
04
C33
05
C27
press the
button.
06
C58
07
S02
08
S06
m
2
Press the
or
button to select the new
Programme Sorting
programme number position for your
01
TVE
02
TVE2
selected channel (TV Broadcast), then
03
TV3
04
C33
01
TVE
press
.
05
C27
06
C58
07
S02
The selected broadcast channel now
08
S06
moves to its new programme position
and the other broadcast channels
move accordingly.
3
Repeat steps 1) and 2) if you wish to
change the order of the other channels.
4
Press the MENU button on the remote
control to exit and return to the normal TV
screen.
The TV set is now ready for use.
Advertisement
