2: Adjusting The Viewing Angle Of The Tv - Sony Bravia KDL-40NX725 Operating Instructions Manual

Detaching the Table-Top Stand
from the TV
To detach the Table-Top Stand from the TV,
remove the screws
KDL-60NX725, be sure to remove the screws
for detaching the head when the Table-Top
Stand is not attached to the TV.
~
• Do not remove the Table-Top Stand for any
reason other than to install corresponding
accessories on the TV.
• When removing the Table-Top Stand from the
TV, lay the display face down on a stable work
surface that is larger than the TV.
• To prevent damaging the surface of the LCD
display, make sure to place a soft cloth on the
work surface.
• Be sure the TV is on the vertical position before
switching on. TV set must not powered on with
LCD panel face down to avoid uneven picture
uniformity.
10
GB
fixed in step 3. For
2: Adjusting the viewing
angle of the TV
This TV can be adjusted within the angles as
illustrated.
Angle adjustment (Swivel)
(except KDL-60NX725)
~
• When adjusting the angle, hold the stand with one
hand to avoid having the stand slip or TV tip over.
20°
20°
Angle adjustment (Tilt)
(except KDL-60NX725)
~
• Ensure that there are no objects in front of the TV.
IR Sensor
Intelligent Presence Sensor
• Do not expose the Intelligent Presence Sensor to
direct sunlight or other strong light, as
malfunction may occur.
20°
20°
0° - 6°
3D Sync Transmitter