Datalogic DX8210 Reference Manual page 137

Code Identifier Strings
This section of the Message Format window is only available when User Specified is
selected as the Code Identifier. Click
custom code identifier string for any listed code symbology. Click Submit to save
your text to the origin window text field, or click Cancel to return to origin window
without transferring text.
S
PECIAL
Port to Use
Select Aux Serial Port, Main Serial Port, User Socket (1-6), or Fieldbus from the
drop-down list.
Crisplant Device Type/Error Definition
Select DLA Device/Errors or a ASI-Axiom/Errors from the drop-down list. This
allows selection of different device types, as the error codes required by Crisplant
vary from device to device.
Crisplant Manufacturer ID
This field is determined by the Crisplant Device Type/Error Definition selected
above and cannot be edited.
This defines the "Scanner Identity" byte of the Error and Heartbeat messages of the
Crisplant Protocol.
Heartbeat Message Enable
Select the check box to enable the transmission of the Heartbeat message.
Heartbeat Message Timing
Enter a value in milliseconds to define the amount of time between two code
transmissions. If the selected timeout expires and no transmission has occurred,
the Heartbeat message will be transmitted.
Reference Manual
H P : C
OST ROTOCOL RISPLANT
DLA Device/Errors: select when using current Datalogic devices
ASI-Axiom/Errors: Select when using legacy Accu-Sort devices
Messaging | Message Format
to activate the Text Entry Tool and create a
P
ROTOCOL
125