Approvals; Series Change; Models; Xp Proportioning Pump Packages - Graco XP-H Series Operation, Repair, And Parts

Approvals

Approvals
Ex h IIA T3 Gb
II 2 G

Series Change

The XP cart sprayer was upgraded to use the XL air
motor, which provides improvements over the NXT
motor. The frame was upgraded to allow better access
to the lowers.
Series A
Benefits of the new air motor and frame include:
• Improved change over performance of air motor
• Better icing performance
• Ease of use
• Ease of service and greater access to lowers
Series Change Description
C Upgraded air motor with XL motor and
frame change.
10
All systems CE marked
except where noted.
All systems noted by X
(in Approval column)
are Ex marked.
®
Series C

Models

Using an XP or XP-h system, or components on the
system, not approved for hazardous locations or
explosive atmospheres may result in a fire or explosion
hazard.
The XP and XP-h systems are not approved for use in
hazardous locations unless the base model, all
accessories, all kits, and all wiring meet local, state,
and national codes.
See Systems with Explosion-Proof Heaters on page
air
25.
NOTE: See special conditions for safe use in your
Viscon HP Heater Manual, and PressureTrak manual.
XP Proportioning Pump
Packages
Packages include motor, pump lowers, and all
connection hardware.
Building systems with bare proportioning pump
packages:
• Over Pressure Protection must be used, see
page 9. See chart on page 52 to identify the over
pressure relief valves to use with your system.
• All components must meet or exceed maximum
working pressures.
NOTE: All pump packages are Ex rated except for the
XP-h pump packages (284xxx):
Pump sizes are marked on the pump cylinder; sizes are
nominal. See technical specifications in your Xtreme
lowers manual for actual displacement.
3A0420ZAF