Satellite Receiver And Cable/Antenna - Sony KDF-42E2000 Operating Instructions Manual

Satellite Receiver
and Cable/Antenna
Coaxial cable
26
❑
SAT signals are selected by the SAT Box connected to the VIDEO
INPUT. TV signals are selected from the signal connected to the
CABLE input.
Disconnect all power sources before making any connections.
1
Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
2
Use A/V and S VIDEO cables to connect the satellite receiver's AUDIO
and S VIDEO OUT jacks to the TV's AUDIO and S VIDEO IN jacks.
3
Use a coaxial cable to connect your cable to the TV's CABLE jack, or
your antenna to the TV's VHF/UHF jacks.
✍
If your satellite receiver is not equipped with S VIDEO, use a VIDEO
cable (yellow) instead of the S VIDEO cable.
Rear of TV
VHF/UHF
CABLE
S VIDEO
Satellite receiver
A/V cable
S VIDEO cable
1 3
S VIDEO
VIDEO
L
(MONO)
AUDIO
R
VIDEO IN
VIDEO
AUDIO-L
AUDIO-R
Satellite
antenna
cable
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.