First Use; Antenna Connection - B&B Electronics Conel ER75i Start Manual

First use

Before putting the router into operation it is necessary to connect all the components
that are required to run your applications.
The router cannot be operated without connected antenna, inserted SIM card and
connected power supply. If there is no connected antenna during operation of the router,
the router may be damaged!

Antenna connection

Use FME connector for antenna connection. Main antenna is connected by screwing
at ANT connector (see figure below).
Inserting SIM card
The SIM card reader for 3 V and 1.8 V SIM cards is located at the front panel of Conel
router. To initiate router operation it is necessary to insert an activated SIM card with
unblocked PIN to the SIM card reader.
Slide out SIM card holder by pressing the small yellow button right from the SIM card
socket. Insert SIM card into holder and push the holder into the reader (see figure below).
SIM card
reader
START GUIDE ER75i
2
ER75s
&
Antenna
connector