Extending Programming Help - Siemens Sinumerik 840 sl Commissioning Manual

Hide thumbs Also See for Sinumerik 840 sl:
Table of Contents

Advertisement

1.3.2

Extending programming help

A special entry in the "Extended help" parameter of the instruction definition makes it
possible to integrate an extended help in addition to the quick help (e.g., detailed information
on the selected command).
The following calls are possible:
• Editor help:
• Cycle help:
Parameters of instruction definition
Technology/topic ID/extended help/instruction text/
descriptive text
"Extended help":
The following entries are possible in the "Extended help" parameter:
• Editor help
• Cycle help
Necessary files
• IFM_GR.COM: Text file with program commands and brief description
• *.PDF: Help file, e.g., 840D_PG_GR.PDF
• *.txt: Jump file, e.g., 840D_PG_GR.TXT
1) Define jump labels in document
The jumps must be identified by an index entry and a single-column index list (right-justified
page numbers) must be generated in the document (e.g., Winword) from which sections are
to be displayed on the controller as a PDF.
If several jumps are required for one command, the same number of index labels must be
created.
Online Help (HE1)
Commissioning Manual, 11/2006, 6FC5397-0DP10-0BA0
Jump directly to the help (PDF file) from the quick "ASCII" help for a term (command) in
the program editor.
Preconditions:
A list of additional commands which are to be displayed in the quick help has already
been created as described in Section "Extension of text files" (e.g., IFM_GR.COM) and is
stored in the controller. This allows you to call up the extended help after the quick help
using the Info key. Please note that the list of commands for the quick help is identical to
the list for the extended help (concordance).
Jump to the help (PDF file) from an input field of the cycle screen.
/"PDF file name", help ID, "search string"/
Example: a/20/"PGA.PDF",2,"="/=/Assignment operator
/"PDF file name", help ID, "search string" (file name, help
screen)/
Example: a/3/"PG.PDF",17,"ANG"/ANG/Contour angle (s)
Programming help systems
1.3 Extended "PDF" help
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840di slSinumerik 810d

Table of Contents