Select System - Buderus Logamatic SC40 Installation And Servicing Instructions

Service level menu (for qualified heating engineers only)
7
7.4

Select system

Manu: Service > Select system
The Select system option allows you to select the basic system and the configuration diagram for
the solar system. There are three basic system options:
– Domestic hot water systems
– Domestic hot water systems with central heating boost facility
– Domestic hot water systems with swimming pool heating
Within each basic system there are various choices of configuration diagram for the
solar thermal system. The precise designations and layouts of all configuration dia-
grams are detailed in Section 4.4 "Electrical connections".
V To switch to the Service level menu: simultaneously press the
V Use the rotary selector
SERVICE
Language
Time
>
System selection
Settings
Operating mode
V Select the required basic system using the rotary selector
V Hold down the
figuration diagram.
System selection
Central heating
backup systems
V To save the new setting: release the
V To return to the next menu up, press the
Setting range
Configuration diagrams T1 to T8
Configuration diagrams H1 to H13
Configuration diagrams S1 to S6
Tab. 12
52
to select Select system then press
button and use the rotary selector
OK
H1
Default setting
H1
Logamatic SC40 - Technical specifications are subject to change without prior notice.
button.
OK
button.
and buttons.
OK
to confirm.
OK
.
to select the desired system con-
New setting