Entering Basic Settings - Buderus Logamatic SC40 Installation And Servicing Instructions

Commissioning (for engineers only)
6.1

Entering basic settings

When the controller is initially installed, the language and time must be entered.
V Enter the language and time before continuing with commissioning.
LANGUAGE
English
Time
Set hours
12:00 h
Time
Set minutes
12:00 h
1 5
Tab. 9 Basic settings after installation
Logamatic SC40 - Technical specifications are subject to change without prior notice.
V Hold down the
select the desired language.
V To save the setting: release the
V Using the rotary selector
V Hold down the
set the hour.
V To save the setting: release the
V Using the rotary selector
V Hold down the
set the minutes.
V To save the setting: release the
Switch to View level by turning the rotary selector
Subsequent changes can be made from the Service level menu by
selecting Settings.
button and use the rotary selector
OK
OK
, select Set hour.
button and use the rotary selector
OK
OK
, select Set minutes.
button and use the rotary selector
OK
OK
button.
button.
button.
.
6
to
to
to
47