Table of Contents
Advertisement
Safety information present on the pump
Safety warnings applied to the pump must be respected and restored in case of illegibility, and are as follow:
Warning
Description signs applied
1.
Marking plate
Label rotation and not run dry
2.
indication
3.
Hydro-test label
4.
Label quality control assembly
INSTRUCTIONS AND PROCEDURES FOR THE TRAINING OF THE PERSONNEL AND
FOR EMERGENCIES
Operators responsible for the various life stages of the pump must be:
- for assemblers: staff formed and trained on good practices for handling of goods with the use of tools and
lifting equipment;
- for installers of pipes and electrical connections: qualified and trained staff to operate on electrical plants, staff
with experience in hydraulic installations;
-f or users: professional staff trained in the instruction for use of this pump.
In case of emergency:
- alert who is close to the situation of danger, even waving his arms;
- stop the pump by pressing the nearest emergency stop button;
Recovery mode
To return to normal operating conditions, you must delete all the causes that have generated the emergency,
possibly repairing or replacing the components that caused the failure.
CAUTION
After the intervention of security devices, you must find the cause of action
before continuing operations.
Fire-fighting equipment to be used:
In case of fire involving the pump, you can use water or foam liquid only after removing the voltage, or a powder
type fire extinguisher with extinguishing agent. Do not use CO2 as being launched at -79 ° C may react violently
with the hot parts.
Emission / dispersion of harmful substances
The fluid in the plant might be released in the atmosphere following an intervention or the pump break.
Symbol/indication
As described in paragraph
M PUMPS
.
"PLATE"
Doc. ISM0023
Instruction Manual of series V MODULAR – Rev.02
Quantity
Notes
1
1
1
2
1
3
1
Internal use
Pag. 15/32
Advertisement
Table of Contents
