Download Print this page

Plasmon Raidtec FS3102 Quick Start Manual page 5

Logical Volume Mapping

You can map the default Logical Volume to the host computer by selecting FC Access in the

Logical Volume drop down menu. Any Host HBAs visible to the FS3102 will appear in the

Hosts table and the Logical Volume will appear in the Logical Volumes table. There will be

no entry in the Host Mapping table.

Firstly, select a Host HBA for which you want to define a mapping. Then select the Logical

Volume from the Logical Volumes table, click on the Add button to move it to the Host

Mappings table and click OK to save the new mapping. Repeat the process for each Logical

Volume to be mapped to this Host HBA.

Repeat the mapping procedure for further HBAs, as required.

Please refer to the User Guide on the accompanying Administrator CD for detailed

system set-up.

Raidtec FS3102 Quick Start Guide

Figure 6 – Logical Volume Mapping