Contact Plasmon Sales and Marketing Global Technical Support European Headquarters http://www.plasmon.com/raid Plasmon Data Limited, Tel: +44 (0) 1763 262 963 Whiting Way, mailto:support@plasmon.co.uk Melbourn, Hertfordshire, SG8 6EN, U.K. mailto:sales@plasmon.co.uk http://www.plasmon.com/ Plasmon and Raidtec are registered trademarks of Plasmon Plc. Copyright 2006...
Page 2
Raidtec FS3102 Quick Start Guide Raidtec FS3102 Quick Start Guide Raidtec FS3102 Quick Start Guide Raidtec FS3102 Quick Start Guide Unpacking the FS3102 The following items are included in your FS3102 package. Check the packing list before installation to ensure that you have received each item. If you are missing any item, please contact your Plasmon reseller.
Figure 2 – Connecting to a host Administration The Raidtec FS3102 is managed through an Ethernet connection. Connect the Raidtec FS3102 to the network using the Ethernet cable provided. Any PC on the network that has Raidtec Manager installed can manage the Raidtec FS3102.
Page 4
By default, the FS3102 is configured to use DHCP for assigning IP addresses. If DHCP is not enabled and no IP address has been assigned previously, the Raidtec FS3102 system will use the Default IP Address shown on the cover of this document. This Default IP Address is intended for temporary use only.
Page 5
Raidtec FS3102 Quick Start Guide Raidtec FS3102 Quick Start Guide Raidtec FS3102 Quick Start Guide Raidtec FS3102 Quick Start Guide Logical Volume Mapping You can map the default Logical Volume to the host computer by selecting FC Access in the Logical Volume drop down menu.