Aeotec AEOEZW120 User Manual
  1. Manuals
  2. Brands
  3. Aeotec Manuals
  4. Accessories
  5. AEOEZW120
  6. User manual

Aeotec AEOEZW120 User Manual

Hide thumbs
1
2
3
4
5
6
7
Table of Contents

Advertisement

Quick Links

Download this manual
Door Window Sensor Gen5 user guide.
Modified on: Mon, 7 Jan, 2019 at 5:38 PM
Aeotec Door Window Sensor Gen5
Aeotec Door Window Sensor Gen5 has been crafted to power connected lighting using Z-Wave Plus
(http://aeotec.com/z-wave-plus)
out more about Door Window Sensor Gen5
To see whether Recessed Door Sensor Gen5 is known to be compatible with your Z-Wave system or not, please
reference our Z-Wave gateway comparison
Door Window Sensor Gen5
technical-specification-)
Familiarize yourself with your Door Window Sensor
Package contents:
1. Sensor Unit.
2. Bidirectional Mount Plate.
3. Magnetic Unit.
4. Magnetic Unit Outer Shell.
5. AAA Batteries (x2)
6. Double-Sided Mounting Tape (x6)
. It is powered by Aeotec's Gen5
(http://aeotec.com/z-wave-door-window-sensor)
(http://aeotec.com/z-wave-gateways)
(https://aeotec.freshdesk.com/solution/articles/6000168006-door-window-sensor-gen5-
can be viewed at that link.
(http://aeotec.com/z-wave-gen5)
listing. The technical specifications of
technology. You can find
by following that link.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AEOEZW120 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aeotec AEOEZW120

Summary of Contents for Aeotec AEOEZW120

  • Page 1 Modified on: Mon, 7 Jan, 2019 at 5:38 PM Aeotec Door Window Sensor Gen5 Aeotec Door Window Sensor Gen5 has been crafted to power connected lighting using Z-Wave Plus . It is powered by Aeotec’s Gen5 technology. You can find (http://aeotec.com/z-wave-plus)
  • Page 2 7. Screws (x4)

  • Page 3: Important Safety Information

    Important safety information. Please read this and other device guides carefully. Failure to follow the recommendations set forth by Aeotec Limited may be dangerous or cause a violation of the law. The manufacturer, importer, distributor, and / or reseller will not be held responsible for any loss or damage resulting from not following any instructions in this guide or in other materials.
  • Page 4 If you are using double-sided tape, wipe the two surfaces clean of any oil or dust with a damp towel. When the surface has completely dried, peel one side of the tape back and attach it to the corresponding section on the rear side of the mounting plates.

  • Page 5: Advanced Functions

    Door Window Sensor to your needs. Testing your Sensor before installing. You should test your sensor before installing it into place to confirm if the unit is working properly after you have added it to your network: 1. Take the Sensor and the Magnet unit in separate hands. 2.
  • Page 6 1. Remove your Sensor unit from its Back Mounting Plate, press the Action Button on the back of the Sensor unit and then release the Action Button. This will trigger and send a wake up notification command to your controller/gateway. 2.
  • Page 7 These are not exposed well in most gateways, but at the least you can manually set configurations through most Z- Wave gateways available. These configuration options may not be available in a few gateways. You can find the configuration sheet here: https://aeotec.freshdesk.com/helpdesk/attachments/6052990543 (https://aeotec.freshdesk.com/helpdesk/attachments/6052990543)

This manual is also suitable for:

Door window sensor gen5

Table of Contents