Download Print this page

Friedrich UCT08A10A Operating Instructions Manual page 12

Through the wall a/c
Hide thumbs Also See for UCT08A10A:

Advertisement

Available languages

Available languages

6. Money Saver Button:
Saver mode, the light will turn on. In Money Saver
mode, the unit will turn-off once the room is cooled
to the user set temperature.
The unit will turn back on when the room
temperature rises above the user set temperature.
Before the compressor
run for 20 sec.,
then it will stop for 10 min., It will
repeat to provide a much more comfortable feeling
and save energy.
7. Sleep Button:
Press the SLEEP button, all the
display lights will turn off after a while, but the
Sleep Light is always on. In SLEEP mode, the air-
conditioner will automatically adjust the
temperature and fan speed to make the room more
comfortable during the night. For cooling mode, the
set temperature will automatically raise every 30-60
minutes and at most change six times until the set
temperature is 81 or 82 . For heating mode, the
set temperature will automatically decrease every
30-60 minutes and at most change six times until
the set temperature is 75 or 76 .
And every running time depends on the set
temperature.
8. Fan Speed Button:
to choose the fan speed options. You can choose
Hi, Med, Lo or auto speed in COOL mode and
choose Hi, Med, Lo in FAN mode.
9.
Filter Button:
When the Filter Check light is off,
it isn't necessary to press the Filter Check button.
When the Filter Check light is on,
the light by pressing the Filter Check button. After
the fan motor works for 500 total hours, the Filter
Check light will turn on to remind the user to clean
the filter.
When the unit is in Money
starts
, the fan motor will
ºF
ºF
Press the FAN SPEED button
you can turn off
10.
Directional Louvers:
horizontal wheel to control the horizontal direction
and the air deflector to control the vertical
direction.
air deflector
10
To direct the airflow, use the
horizontal wheel
air deflector

Advertisement

loading