Advertisement
Handset Volume and Ringing Volume
To adjust the handset volume, press the – or + buttons
to the left of the number pad while the handset is off
hook (lifted).
To adjust the ringing volume, press the – or + buttons
while the handset is on hook (in the cradle).
Note: If the phone has been reset, the volume settings
will also be reset and you will need to adjust them again.
Initiating a Local Conference Call
1. Call a contact.
2. Press the Conference soft key; the party you have
been speaking to will be put on hold and you will hear
the dial tone.
3. Dial the additional party and wait for them to answer
so you can notify them that you are bringing them into a
conference call.
4. Press the Conference soft key again; all parties are
now on the call.
Note: If the party doesn't answer or doesn't want to
participate in the conference call, press "End Call" and you
will be returned to the original caller.
Polycom VVX1xx/2xx Quick Reference
Do Not Disturb
1. Press the Home key.
2. Use the arrow keys to scroll through and select
Features, then select Do Not Disturb.
3. To turn Do Not Disturb off, follow the same steps as
above.
Forwarding Calls on an Extension
1. With the handset on the hook dial *72 followed by the
10-digit number. (*72XXX.XXX.XXXX)
2. Press the dial soft key. The phone will produce two
ascending tones and end the call. Forwarding is setup.
After the initial setup, use *73 to deactivate forwarding.
Note: You can use *72 alone to enable forwarding again
to the same number that you previously entered.
For Technical Support
Technical support for your service is included and we're
happy to assist with any questions or comments you
may have. Our hours are Monday – Friday, 5am – 6pm
PST and we can be reached by one of the following
methods:
1. E-mail us anytime at support@noctel.com.
2. Dial 611 from your NocTel Phone.
3. Call from any phone by dialing a local support line:
Portland, OR: +1 503.764.4300
Toll-Free:
+1 888.400.4521
Ref: 080815
Advertisement
