Auto-Tuning The Tv - Sony Bravia KDL-26P25xx Operating Instructions Manual

3
F f
Press / to select the language
displayed on the menu screens, then press
.
Auto Start Up
Language
Country
Select: Confirm:
4
F f
Press / to select the country/region in
which you will operate the TV, then press
.
Auto Start Up
Language
Country
Select: Confirm:
If the country/region in which you want to use the
TV does not appear in the list, select "-" instead of
a country/region.
The message confirming the TV start auto-tuning
appears on the screen, then go to "6: Auto-tuning
the TV".
6
GB

6: Auto-tuning the TV

After selecting the language and country/region, a
message confirming the TV start auto-tuning appears
on the screen.
The TV will now search for and store all available TV
channels.
1
Press .
Back: Start:
The TV starts searching for all available digital
channels, followed by all available analogue
channels. This may take some time, please be
patient and do not press any buttons on the TV or
remote.
If a message appears for you to confirm the aerial
connections
No digital or analogue channels were found.
Check all the aerial connections and press
start auto-tuning again.
2
When the Programme Sorting menu
appears on the screen, follow the steps of
"Programme Sorting" (page 20).
If you do not wish to change the order in which the
analogue channels are stored on the TV, go to step
3.
3
Press MENU to exit.
The TV has now tuned in all the available
channels.
1
3
Cancel:
MENU
to