Qualcast QHTLi18 Original Instructions Manual page 18

WARNING!
Before using the tool, read all instructions carefully.
Blade sheath
Charging the battery
WARNING!
The charger and battery pack are specifically designed to work together so do
not attempt to use any other devices. Never insert or allow metallic objects into
your charger or battery pack connections; an electrical failure and hazard will
occur.
The battery needs to be charged before first use and whenever it fails to produce
sufficient power on jobs that were easily done before.
WARNING! NEVER LEAVE THE BATTERY AND CHARGER UNATTENDED
WHEN CHARGING THE BATTERY.
This product comes with a lithium-ion battery pack. Lithium-ion batteries
don't lose charge when not in use, and don't lose charging capacity overtime.
Nevertheless, it is best practice to charge the battery when empty or insufficient
to do the job.
The charging procedure
WARNING!
The battery cannot be charged immediately after use, it should cool off for a
period of time. The LED (G) lights switching from green to red means it can be
charged.
Connect the charger (H) to the charging station (I).
Plug the charger into an appropriate 230-240V~50Hz power outlet. The LED (G) lights
green to tell you that the charger is ready for use.
Slide the charging station (I) into the battery pack (E), make sure the charging station is
fully seated in the battery pack. The LED (G) lights up red to tell you that the battery pack is
on charge.
The battery pack will be fully charged in 1 hour. And the LED (G) lights up green again to
tell you that the battery pack is fully charged.
18